5 min read
Daily: temperature and doors
The single most useful habit is a temperature reading at opening and closing, written down. It catches a drift before stock is affected, and it gives a service technician a trend rather than a snapshot. Door seals can be checked in the same minute: a strip of paper that pulls out easily when the door is closed tells you the gasket is not sealing there.
Staff should also notice water. Water under a cabinet is usually a blocked drain, and it is far cheaper to fix before it reaches the floor or the stock stored below.
Monthly: cleaning that matters
Condensers collect grease and dust, and a dirty condenser is the most common cause of a fridge running hot and long. Where the coil is accessible, brushing or vacuuming it monthly makes a measurable difference. Where it is not accessible, that is worth raising at the next service.
Door gaskets, hinges and closers also deserve a monthly look. A gasket that has perished is a cheap part that protects an expensive compressor, and it is often ignored until the cabinet fails.
Every six months: the professional visit
A service visit should cover coil cleaning, drain and defrost checks, controller and probe verification, electrical connections and door seals, with a record of temperatures and findings. That is what turns maintenance from a cost into a record.
For a business with several cabinets, an asset list with a visit history is worth more than any single repair, because it shows which units are becoming unreliable and should be budgeted for.
In short
- Record temperatures daily; trends catch faults before stock is lost.
- Clean accessible condensers monthly; grease and dust cause most hot running.
- Check gaskets and drains monthly, not only at service visits.
- Keep a service record per cabinet so replacements can be budgeted, not discovered.
Questions on this topic
Is a monthly clean really necessary?
In a kitchen with frying or baking, yes. Grease on a condenser acts like insulation and pushes the whole system harder. In a retail display away from cooking, less often may be fine.
Can staff clean the condenser?
Where it is safely accessible and the unit is switched off at the isolator, brushing or vacuuming is reasonable. Anything involving panels, wiring or the refrigerant circuit is a technician's job.
How long should a commercial fridge last?
It varies with the cabinet, the environment and the maintenance. A well-maintained unit in a ventilated position will outlast an identical one in a hot, greasy corner by a wide margin.